Computerized Generation of Endodontic Files by Reproducing the Flute Grinding Manufacturing Process

Abstract

Background: File fracture during root canal treatment in endodontics is a major concern for clinicians. The strength of the file is strongly dependent on its geometry, material, and working conditions; finite element simulations are used to understand these failure mechanisms. One limitation of the models used for these simulations is the approximate geometric representation typically obtained by rotating and scaling a specific cross-section shape along the file length. Given the influence of file geometry on file strength, a more realistic representation based on the manufacturing method is needed. Methods: A computerized method was developed to generate the file geometry by simulating the flute grinding manufacturing process. This method generates the 3D geometry of the file starting from a blank and reproducing the motions of the file and grinding wheel. Results: The cross-section of the resulting geometry does not involve simple rotation and scaling but changes from the shank to the tip. The tilt angle of the grinding wheel affects the final geometry, thus altering the convexity of the cross-section. Several other parameters, such as the pitch and the radius of the grinding disc tip, impact the final geometry. Conclusions: The proposed computational method allows for the generation of endodontic file geometries that match those produced via the actual flute grinding method. This tool may help researchers and tool designers in the preparation of finite element models to assess the strength of realistic files.

Keywords

• endodontic files
• computer-aided design
• computer-aided manufacturing