Identifying bedrest using waist-worn triaxial accelerometers in preschool children.

Abstract

PurposeTo adapt and validate a previously developed decision tree for youth to identify bedrest for use in preschool children.MethodsParents of healthy preschool (3-6-year-old) children (n = 610; 294 males) were asked to help them to wear an accelerometer for 7 to 10 days and 24 hours/day on their waist. Children with ≥3 nights of valid recordings were randomly allocated to the development (n = 200) and validation (n = 200) groups. Wear periods from accelerometer recordings were identified minute-by-minute as bedrest or wake using visual identification by two independent raters. To automate visual identification, chosen decision tree (DT) parameters (block length, threshold, bedrest-start trigger, and bedrest-end trigger) were optimized in the development group using a Nelder-Mead simplex optimization method, which maximized the accuracy of DT-identified bedrest in 1-min epochs against synchronized visually identified bedrest (n = 4,730,734). DT's performance with optimized parameters was compared with the visual identification, commonly used Sadeh's sleep detection algorithm, DT for youth (10-18-years-old), and parental survey of sleep duration in the validation group.ResultsOn average, children wore an accelerometer for 8.3 days and 20.8 hours/day. Comparing the DT-identified bedrest with visual identification in the validation group yielded sensitivity = 0.941, specificity = 0.974, and accuracy = 0.956. The optimal block length was 36 min, the threshold 230 counts/min, the bedrest-start trigger 305 counts/min, and the bedrest-end trigger 1,129 counts/min. In the validation group, DT identified bedrest with greater accuracy than Sadeh's algorithm (0.956 and 0.902) and DT for youth (0.956 and 0.861) (both PConclusionsThe DT-based algorithm initially developed for youth was adapted for preschool children to identify time spent in bedrest with high accuracy. The DT is available as a package for the R open-source software environment ("PhysActBedRest").