Conformal Load-Bearing Antenna Structures—Mechanical Loading Considerations

Abstract

One of the important functions of antennas is to facilitate wireless communication. The IEEE 802.11 is part of the IEEE802 set of local area network technical standards, and specifies the media access control and physical layer protocols for implementing wireless local area network computer communication. The network physical layer protocol with a centre frequency of 2.4 GHz has a bandwidth of 22 MHz. A conformal load-bearing antenna structure (CLAS) facilitating this communication band that is tuned to 2.4 GHz must remain within this bandwidth. The aim of this paper is to investigate the effects of mechanical loading imposed on a load-bearing patch antenna with respect to its ability to remain within the specified bandwidth. The mechanical loading configurations considered include tensile, biaxial, and twisting. This paper will also report on the response of the antenna patch to the presence of a disbond between the metallised antenna and its substrate, which can arise due to fabrication anomalies and operational usage. This numerical work will assist in the design of experimental testing of the mechanical and electromagnetic properties of an embedded CLAS, which will ultimately be used to inform selection of appropriate regions to place patch antennas on load-bearing deformable surfaces.

Keywords

• CLAS
• HFSS
• disbond
• radiofrequency