IEEE Access
(Jan 2021)
Corrections to “Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines”
Payam Shams Ghahfarokhi,
Andrejs Podgornovs,
Ants Kallaste,
Antonio J. Marques Cardoso,
Anouar Belahcen,
Toomas Vaimann,
Hans Tiismus,
Bilal Asad
Affiliations
Payam Shams Ghahfarokhi
ORCiD Department of Electrical Machines and Apparatus, Riga Technical University, Riga, Latvia
Andrejs Podgornovs
ORCiD Department of Electrical Machines and Apparatus, Riga Technical University, Riga, Latvia
Ants Kallaste
Department of Electrical Power Engineering and Mechatronics, Tallinn University of Technology, Tallinn, Estonia
Antonio J. Marques Cardoso
ORCiD CISE—Electromechatronic Systems Research Centre, University of Beira Interior, Covilha, Portugal
Anouar Belahcen
ORCiD Department of Electrical Power Engineering and Mechatronics, Tallinn University of Technology, Tallinn, Estonia
Toomas Vaimann
ORCiD Department of Electrical Power Engineering and Mechatronics, Tallinn University of Technology, Tallinn, Estonia
Hans Tiismus
ORCiD Department of Electrical Power Engineering and Mechatronics, Tallinn University of Technology, Tallinn, Estonia
Bilal Asad
Department of Electrical Power Engineering and Mechatronics, Tallinn University of Technology, Tallinn, Estonia
DOI
https://doi.org/10.1109/ACCESS.2021.3074827
Journal volume & issue
Vol. 9
Abstract
Read online
In the above article [1], Figs. 3 and 19 are modified versions of Fig. 18 from the article. Although this source was cited in our article as [6], the captions for these figures are missing the appropriate citation/reference.
WeChat QR code
Close
