Modeling Silicon-Dominant Anodes: Parametrization, Discussion, and Validation of a Newman-Type Model

Abstract

Silicon is a promising anode material and can already be found in commercially available lithium-ion cells. Reliable modeling and simulations of new active materials for lithium-ion batteries are becoming more and more important, especially regarding cost-efficient cell design. Because literature lacks an electrochemical model for silicon-dominant electrodes, this work aims to close the gap. To this end, a Newman p2D model for a lithium-ion cell with a silicon-dominant anode and a nickel-cobalt-aluminum-oxide cathode is parametrized. The micrometer silicon particles are partially lithiated to 1200 mAh gSi−1. The parametrization is based on values from the electrode manufacturing process, measured values using lab cells, and literature data. Charge and discharge tests at six different C-rates up to 2C serve as validation data, showing a root-mean-squared error of about 21 mV and a deviation in discharge capacity of about 1.3%, both during a 1 C constant current discharge. Overall, a validated parametrization for a silicon-dominant anode is presented, which, to the best of our knowledge, is not yet available in literature. For future work, more in-depth studies should investigate the material parameters for silicon to expand the data available in the literature and facilitate further simulation work.

Keywords

• silicon
• p2D model
• parametrization
• validation
• half-cell balancing