Preparation and Properties of Lightweight Geopolymer by Bio-Based Foaming Agent

Abstract

Lightweight geopolymers have the advantages of a wide source of raw materials, chemical corrosion resistance, high mechanical strength and excellent durability, and are expected to replace traditional building insulation materials. In this paper, a green bio-based foaming agent with a small 1 h settlement distance, high average foaming multiple and low bleeding ratio was obtained by a Cetyltrimethylammonium Bromide/yeast solution. When the amount of Cetyltrimethylammonium Bromide is 0.50 wt%, the foam prepared by the yeast and Cetyltrimethylammonium Bromide solution exhibits the improved 1 h settlement distance, the large average foaming multiple, the small bleeding ratio and uniform foam size. Subsequently, a lightweight geopolymer based on metakaolin and fly ash (or silica fume) was successfully prepared by the bio-based foaming agent, and the effects of different foam content on the properties of the geopolymer, such as dry density, water absorption, thermal conductivity, compressive strength and morphology, were studied. With an increase in foam content, the dry density, thermal conductivity and compressive strength of the geopolymer gradually decrease, the water absorption increases, regardless of whether silica fume or fly ash are added. Herein, it is confirmed that the foaming agent based on yeast can be effectively used to prepare lightweight geopolymers, which can provide vast opportunities to turn into candidates for novel inorganic thermal insulation materials.

Keywords

• yeast
• bio-based foaming agent
• geopolymer
• lightweight