Roughness Effect of Submerged Groyne Fields with Varying Length, Groyne Distance, and Groyne Types

Abstract

Design guidelines were developed for a number of in-stream structures; however, the knowledge about their morphological and hydraulic function is still incomplete. A variant is submerged groynes, which aim to be applicable for bank protection especially in areas with restricted flood water levels due to their shallow height. Laboratory experiments were conducted to investigate the backwater effect and the flow resistance of submerged groyne fields with varying and constant field length and groyne distance. The effect of the shape of a groyne model was investigated using two types of groynes. The validity of different flow types, from “isolated roughness” to “quasi smooth”, was analyzed in relation to the roughness density of the groyne fields. The results show a higher backwater effect for simplified groynes made of multiplex plates, compared to groynes made of gravel. The relative increase of the upstream water level was lower at high initial water levels, for short length of the groyne field, and for larger distance between the single groynes. The highest roughness of the groyne fields was found at roughness densities, which indicated wake interference flow. Considering a mobile bed, the flow resistance was reduced significantly.

Keywords

• in-stream structures
• groyne field
• groyne type
• backwater effect
• flow resistance
• friction factor
• flow type