Heat transfer enhancement by feedback blowing and suction based on vortical structure in turbulent channel flow at low Reynolds number

Abstract

Heat transfer enhancement is essential in low Reynolds number flow because recent small heat exchangers require narrow flow passages. In the present study, we conducted direct numerical simulations of the channel flow to investigate the turbulence sustaining effect by feedback blowing and suction from the wall. The initial flow field corresponded to the fully developed turbulent channel flow, and the Reynolds number suddenly decreased at the beginning of the simulation. The results indicated that there are two approaches for the turbulence maintenance. If the amplitude of the blowing and suction is high, then the sensor detects the blowing and suction from the wall, and the velocity fluctuation corresponds to self-maintenance. Then, we obtained large heat transfer. However, the gain was small. If the amplitude is moderate, then the blowing from the wall to the low-speed streaky structures pushes up, and the suction attracts the high-speed streak toward the wall. The effect to increase the Reynolds shear stress and heat transfer results in the promotion of the turbulence and heat transfer with high gain.

Keywords

• direct numerical simulation
• turbulent channel flow
• blowing and suction control
• heat transfer enhancement
• turbulent control