Monitoring Extractive Activity-Induced Surface Subsidence in Highland and Alpine Opencast Coal Mining Areas with Multi-Source Data

Abstract

Mining developments in alpine coal mining areas result in slow or rapid ground subsidence, which can lead to melting and collapse of permafrost. This paper integrated unmanned aerial vehicle (UAV) images and satellite-based SAR interferometry images to monitor intensive surface mining subsidence during reclamation. Digital Surface Model (DSM) acquired from UAV images was first used to evaluate the changes of the reclamation scheme on the microtopography carried out by slope and the Digital Elevation Model (DEM) of difference (DoD). The monitoring results showed that the slope had been reduced from over 30 degrees to under 15 degrees after the terrain had been reshaped. The DoD map revealed the distribution of main extraction areas and landfill areas. To further monitor the surface subsidence after local terrain adjustment, the Permanent Scatterer Interferometry (PS-InSAR) method was used to reveal the surface subsidence characteristics of the mine site before and after reclamation. The maximum cumulative subsidence ranged from −772.3 to 1183 mm based on 21 Sentinel-1A images in three years. Within a year of terrain reshaping, uplift and subsidence still occurred at hills and pit side slopes, following the nearly equal subsidence rate. The experimental results showed that the slope reshaping and vegetation recovery had a limited impact on the reduction of the ground subsidence in a short period. Therefore, on this basis, a combination of UAV and PS-InSAR methods can be used to continue monitoring time series subsidence in alpine mines.

Keywords

• PS-InSAR
• surface subsidence
• DoD
• opencast mine
• reclamation