Journal of Composites Science (Nov 2023)
How Do 3D Printing Parameters Affect the Dielectric and Mechanical Performance of Polylactic Acid–Cellulose Acetate Polymer Blends?
Abstract
Three-dimensional printing is a prototyping technique that is widely used in various fields, such as the electrical sector, to produce specific dielectric objects. Our study explores the mechanical and dielectric behavior of polylactic acid (PLA) and plasticized cellulose acetate (CA) blends manufactured via Fused Filament Fabrication (FFF). A preliminary optimization of 3D printing parameters showed that a print speed of 30 mm·s−1 and a print temperature of 215 °C provided the best compromise between print quality and processing time. The dielectric properties were very sensitive to the three main parameters (CA content WCA, infill ratio, and layer thickness). A Taguchi L9 3^3 experimental design revealed that the infill ratio and WCA were the main parameters influencing dielectric properties. Increasing the infill ratio and WCA increased the dielectric constant ε′ and electrical conductivity σAC. It would, therefore, be possible to promote the integration of CA in the dielectric domain through 3D printing while counterbalancing its greater polarity by reducing the infill ratio. The dielectric findings are promising for an electrical insulation application. Furthermore, the mechanical findings obtained through dynamic mechanical analysis are discussed.
Keywords