Properties of Polymer-Modified Cement–Water-Glass Slurry

Abstract

The corrosion resistance of cement–water-glass dual-liquid slurry is poor. Improving its material properties is necessary. In this study, we examined the influence of water-based lotions on the fluidity, gelling time, and mechanical properties of a cement–water-glass dual-liquid slurry based on the mix proportion of the dual-liquid slurry commonly used in construction. The mixture ratio of a C-S (cement–water-glass slurry) dual-liquid slurry was adjusted by introducing a waterborne polyurethane lotion and a waterborne acrylic lotion to modify the traditional C-S dual-liquid slurry material. When acrylic acid is used as a modifying polymer at a dosage of 7.5%, the flowability and gelation time of the dual-liquid slurry are excellent, the compressive strength of the stone body decreases slightly, the flexural strength is improved to a certain extent, and the stone body’s crack resistance during water loss is also enhanced. Moreover, the porosity of the stone body is low.

Keywords

• polyurethane
• acrylic acid
• dual-liquid slurry performance