Evaluation of the geothermal potential of the western Snake River Plain based on a deep corehole on the Mountain Home AFB near Mountain Home, Idaho

Abstract

Abstract A geothermal exploration corehole was drilled to a total depth of 1821.5 m on the Mountain Home Air Force Base near Mountain Home, Idaho. The corehole was used to collect an unusually large amount of data, including uniaxial compressive stress (UCS) experiments on core samples, to evaluate the geothermal potential of the western Snake River Plain. In addition, unlike many exploration holes in this region, a fluid entry was encountered at 1745.3 m and flowed artesian to the surface. A maximum temperature of 149.4 °C was calculated for the entry. A temperature log run on the corehole from 3 to 1675 m is nearly linear with little variation. The average geothermal gradient is 73 °C/km, and the average heat flow between 200 and 1500 m is 102 ± 15 mW/m2. Chemical analyses of a sample from the fluid entry suggest that a significant proportion of the water is not meteoric. Five geothermometers show equilibrium temperature in the range of 133–157 °C. Furthermore, based on the unconfined UCS experiments on basalt core samples, a brittle unit was found to comprise the fractured reservoir that the geothermal water flows from, while an overlying ductile unit acts as a hydrothermal caprock. This implies that the reservoir/caprock pair may be a target for future exploration wells drilled to delineate the extent of the potential resource and the boundaries of the connected fracture network.

Keywords

• Temperature log
• Heat flow
• Geothermometers
• Basalt
• UCS experiments