Surface hydrophobization of handmade paper

Abstract

The paper shows the possibilities of increasing the hydrophobicity of the paper surface by applying layers of hydrophobic material to the surface. Various application techniques and the following substances were tested: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. It was found that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac. This manuscript presents novel possibilities of increasing paper surface hydrophobicity by applying layers of hydrophobic material to the surface. Various layer application techniques were examined, as well as substances including: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. Based on the results achieved, it can be concluded that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac.

Keywords

• secondary fibers
• hydrophobization
• stearic acid
• shellac
• zinc(ii)-hydroxide