Effect of the Filler Metal and Shielding Gas on the Fatigue Life in HSLA Steels Welded Using the GMAW Process

Abstract

The composition of the filler electrodes, as well as the shielding gases, has a strong impact on the static and dynamic properties of welded joints in HSLA steels. The content of Cr, Ni, and Mo, along with the shielding gases, helps maintain the hardness values in the HAZ of HSLA steels welded using the GMAW process, resulting in a positive impact on the fatigue life of the joints. Maintaining fatigue properties in the regions of the heat-affected zone is crucial. The increase in the size of the HAZ, coupled with microstructural changes, leads to a reduction in the hardness values in this region, contributing to a decrease in the fatigue life of welded joints. In this study, the effects of using different filler electrodes and shielding gases on the fatigue properties of welded joints in LNE 600 steel with a thickness of 4.75 mm, welded using the GMAW process, were evaluated. It was possible to observe a reduction in the hardness values in the HAZ region and a similar static resistance behavior for all evaluated conditions, except for the ER70S-6 electrode with 5% O2 gas, where the fatigue life showed better results with the application of the ER120S-G electrode.

Keywords

• HSLA steels
• agricultural machinery
• fatigue welds