IEEE Access (Jan 2020)

Research on the Prediction Method of Ultimate Bearing Capacity of PBL Based on IAGA-BPNN Algorithm

  • Yixin Chen,
  • Jianye Zhang,
  • Yongsheng Liu,
  • Siwei Zhao,
  • Shunli Zhou,
  • Jing Chen

DOI
https://doi.org/10.1109/ACCESS.2020.3026091
Journal volume & issue
Vol. 8
pp. 179141 – 179155

Abstract

Read online

In order to better predict ultimate bearing capacity of perfobond leiste shear connection (PBL), the six specimens were designed for push-out test, and the prediction models were built based on an Improved Adaptive Genetic Algorithm (IAGA) and Back Propagation neural network (BPNN) algorithm. With the finite element model established, it was found that the effects of different parameters on the ultimate bearing capacity of PBL vary greatly if using a single parameter method. The calculation results showed that transverse reinforcement diameter, hole diameter of steel plate, the thickness of steel plate and the strength grade of concrete were the four key factors affecting the ultimate bearing capacity of PBL. In order to overcome the disadvantages of BPNN, such as slow convergence speed and easy to fall into local optimization, an improved adaptive genetic algorithm is used to optimize the initial weights and thresholds of BPNN. The comparison shows that the algorithm is superior to the standard genetic algorithm and other heuristic algorithms, in terms of convergence speed, global search ability and robustness. The IAGA-BPNN prediction model was established. Using the experimental data obtained from both the fatigue test and the references as samples to train the prediction model, the results show that the IAGA-BPNN algorithm proposed in this article can accurately predict the ultimate bearing capacity of PBL, with an average error of 1.69%. The comprehensive sensitivity analysis (CSA) method adopts to explore the relative contribution of each key factors and the interaction between the key factors, and the analysis results show that the ultimate bearing capacity of PBL increases significantly with the increase of the thickness of steel plate and hole diameter of steel plate. The accuracy and stability were better than formulas for calculating the ultimate bearing capacity and the BP neural network prediction algorithm.

Keywords