Geotechnics (Oct 2023)
Increased Microbially Induced Calcium Carbonate Precipitation (MICP) Efficiency in Multiple Treatment Sand Biocementation Processes by Augmentation of Cementation Medium with Ammonium Chloride
Abstract
The cementation medium for ureolytic microbially induced calcium carbonate precipitation (MICP) typically consists of urea and a calcium source. While some studies have augmented this basic medium, the effects of adding substrates such as ammonium chloride are unclear. The studies detailed in this paper sought to quantify the effect of the ammonium chloride augmentation of cementation medium (CM) on the process of MICP. An aqueous MICP study was initially carried out to study the effects of adding ammonium chloride to the urea–calcium cementation medium. This batch test also explored the effect of varying the concentration of calcium chloride dihydrate (calcium source) in the CM. A subsequent sand column study was undertaken, whereby multiple treatments of CM were injected over several days to produce a biocement. Six columns were prepared using F65 sand bioaugmented with Sporosarcina pasteurii, half of which were injected with the basic medium only and half with the augmented medium for treatment two onwards. Effluent displaced from columns was tested using ion chromatography and Nesslerisation to determine the calcium and ammonium ion concentrations, respectively, and hence the treatment efficiency. Conductivity and pH testing of effluent gave insights into the bacterial urease activity. The addition of 0.187 M ammonium chloride to the CM resulted in approximately 100% chemical conversion efficiency within columns, based on calcium ion measurements, compared to only 57% and 33% efficiency for treatments three and four, respectively, when using the urea–calcium medium. Columns treated with the CM containing ammonium chloride had unconfined compressive strengths which were 1.8 times higher on average than columns treated with the urea–calcium medium only.
Keywords
