Impact of Magnifying Loupes on the Finish Lines of Fixed Prosthesis Preparations

Abstract

Background: The use of magnification appears to offer advantages in dental preparation for fixed prosthetics and is widely employed in clinical practice, although it has not yet been thoroughly documented. Therefore, the primary objective is to determine the impact of magnification on the quality of finish lines during the performance of preparations for fixed prostheses. Methods: Sixty-four natural teeth were randomized into two groups: Group O (preparation without additional magnification) and Group L (preparation with Kitus® 2.5× magnifying glasses). The teeth were prepared for full crowns, and the finish lines were evaluated under the OPMI® PicoZeiss dental microscope at 10× magnification, based on the criteria of Continuity, Roughness, and Thickness. Results: There were no significant differences between the groups in any of the parameters evaluated. In Thickness, Group O had a median (IQR) of 600 µm (500; 800 µm) and Group L, 600 µm (400; 800 µm). Group L was Continuous in 64.8% of the cases, Slightly Continuous in 26.1% of the evaluations, and Not Continuous in 9.1% of the cases, thus having a slight advantage over Group O, whose values were 58.0%, 35.2%, and 6.8%, respectively. Group L was Polished in 71.0% of the cases and Rough in 29.0% of the evaluations, against 69.3% and 30.7% of Group O, respectively. These results were obtained using IBM SPSS ® software, version 29.0. Conclusions: The 2.5× magnification magnifiers demonstrated a slight positive impact on improving the quality of dental preparations for fixed prostheses. Nevertheless, since the results are not statistically significant, it is difficult to extrapolate them to the broader population.

Keywords

• magnification loupes
• fixed prosthesis
• dental preparation
• finish line
• preparation quality