Dynamic Simulation Model of Miniature Tracked Forestry Tractor for Overturning and Rollover Safety Evaluation

Abstract

This study proposes a method to construct a dynamic simulation model to implement the lateral overturning and backward rollover characteristics of an actual tractor. Based on theoretical analysis, factors affecting these characteristics are identified, which include tractor weight, track width, wheelbase, location of mass center, weight distribution, heights of front and rear axles, and geometric shapes. The location of the mass center of the actual tractor is measured based on the standard test procedure set by the International Organization for Standardization, and the remaining influencing factors are derived through measurements. A three-dimensional (3D) model of the tractor is constructed to reflect all these factors. Additionally, a simulation model utilizing this 3D model is developed using a commercial dynamic simulation software program. The ability of the model to simulate the overturning and rollover characteristics of the actual tractor is verified by comparing the static sidelong falling angle and minimum turning radius with those of the actual tractor. The errors between the characteristics of the actual tractor and those of the 3D model and dynamic simulations are shown to be less than 5%, thus indicating that the proposed method can effectively simulate the overturning and rollover characteristics of the actual tractor.

Keywords

• dynamic simulation model
• miniature tracked forestry tractor
• minimum turning radius
• overturning
• rollover
• static sidelong falling angle