Journal of Pipeline Science and Engineering (Mar 2024)

Dent strain and stress analyses and implications concerning API RP 1183 - Part II: Examples of dent geometry and strain analyses during contact and re-rounding

  • Brian Leis,
  • Amin Eshraghi,
  • Brian Dew,
  • Frank Cheng

Journal volume & issue
Vol. 4, no. 1
p. 100173

Abstract

Read online

API Recommended Practice (RP) 1183 considers three levels of assessment. Its Level 1 and Level 2 processes were considered viable for single peak dents with smooth profiles. The RP deals with more complex dents by way of a Level 3 approach that was reliant on finite element (FE) analysis.Part II of this four-part series of papers has identified the assumptions central to the practices of the RP, and evaluated them in regard to fully symmetric dents whose geometry is broadly aligned with those assumptions. Thereafter, it has examined the effects of asymmetry and skew angle benchmarked relative to the symmetric dents. It becomes apparent that even for symmetric dents significant errors emerge in the RP’s practices based on its reliance on dent profiles characterized along their axial and transverse axes cut through the apex, and the effects of the plastic deformation history developed in forming the dent. As for Part I, it was found that the practices of RP 1183 can (1) incorrectly categorize dents, and (2) grossly underestimate dent severity due to asymmetry and skew angles considered acceptable for Level 2 assessment. Error analyses and trending indicated conservative as well as nonconservative errors, with some more than 300%.As noted in Part I, Part III will consider cyclic loading of dents, and the viability of the dent stress and fatigue analyses that underlie the API RP 1183 Level 1 and Level 2 assessment practices, whereas Part IV considers the viability of the numerical formulations and modeling that underlie its practices.

Keywords