Naked-Eye 3D Display Based on Microlens Array Using Combined Micro-Nano Imprint and UV Offset Printing Methods

Abstract

An optical film integrating microlens array (MLAs) and 3D micro-graphics is an important way to achieve the naked-eye 3D display effect. The 3D micro-graphics is traditionally generated by the micro-nano imprint technology based on precision engraving mold, which leads to high production cost and low production efficiency, and thus restricts the rapid response to production tasks and large-scale popularization and application. In this study, a process scheme for large-scale printing of 3D micro-graphics using UV offset printing based on presensitized (PS) plate was proposed, matching with the MLAs fabricated by micro-nano imprint process to achieve naked-eye 3D display effect. We used the laser confocal microscope to systematically measure and analyze the geometric and optical performance of the fabricated MLAs in terms of height, curvature radius, center distance, spacing, focal length, and numerical aperture, and evaluated the influence of the publishing resolution of the PS plate on the display effect of 3D micro-graphics. The printing quality and display effect of 3D micro-graphics were further improved by adjusting process parameters such as printing speed and printing pressure. The results of the current study demonstrate that the combined application of micro-nano imprint technology based on precision mold and UV offset printing technology based on PS plate can achieve an excellent naked-eye 3D display effect in 360° all angles, which is efficient, cost-saving, and highly flexible.

Keywords

• microlens array
• micro-nano imprint
• UV offset printing
• naked-eye 3D display