Crystalline characteristics of annealed AlN films by pulsed laser treatment for solidly mounted resonator applications

Abstract

Abstract AlN films were deposited on Si substrates using a reactive RF magnetron sputtering process and then the films were annealed by using different laser powers and wavelengths (355 nm, 532 nm and 1064 nm). For all three laser systems, the (002) peak intensity was obviously improved following laser irradiation. The improvement in the crystalline property was particularly obtained in the AlN film processed at 355 nm. In particular, given the use of the optimal laser power (0.025 W), the (002) peak intensity was 58.7% higher than that of the as-deposited film. The resonant frequency and 3 dB bandwidth of a SMR filter with an unprocessed AlN film were found to be 2850 MHz and 227.81 MHz, respectively. Following laser treatment with a wavelength of 1064 nm and a power of 0.25 W, the resonant frequency changed from 2850 to 2858 MHz. Moreover, 3 dB bandwidth changed from 227.81 to 202.49 MHz and the return loss of the filter reduced from 17.28 to 16.48 dB. Overall, the results thus show that the frequency response of the SMR filter can be adjusted and the return loss reduced by means of laser treatment with an appropriate wavelength.

Keywords

• Laser
• Acoustic wave device
• AlN
• Annealing