Performances of Concrete Columns with Modular UHPC Permanent Formworks Under Axial Load

Abstract

Abstract This research proposed the modular prefabricated permanent formwork system made of ultra-high-performance concrete (UHPC). Two kinds of modular formwork shapes were designed: the flat formwork and the ribbed. The experimental investigation on the axial compression performance of the composite columns that consist of the normal strength concrete (NSC) core and the modular UHPC permanent formwork was demonstrated. Compared with the flat formwork, the ribbed formwork exhibited better bonding with the NSC core. As observed from the test results, the composite column with the ribbed formwork presented a similar axial behavior as the NSC column with a slight improvement in ultimate loads. Therefore, the modular UHPC ribbed permanent formwork could be regarded as the additional cover to the conventional NSC column. In addition, the finite element analysis (FEA) model was also developed to simulate the composite columns numerically. The predicted capacities agreed with the experimental results, which validated the numerical models. The crack pattern estimated by the FEA model revealed that the interaction between the permanent formwork and the inner concrete introduced many tiny cracks to the concrete core. However, as protected by the UHPC permanent formwork, the overall durability of the composite columns can still be enhanced.

Keywords

• Modular permanent formwork
• Ultra-high-performance concrete (UHPC)
• Composite column
• Axial compression performance