Replicating CD Nanogrooves onto PDMS to Guide Nanowire Growth for Monolithic Flexible Photodetectors with High Bending‐Stable UV–vis–NIR Photoresponse

Abstract

Abstract Guided nanowires grown on polymer surfaces facilitate their seamless integration as flexible devices without post‐growth processing steps. However, this is challenging due to the inability of polymer films to provide the required lattice‐matching effect. In this work, this challenge is addressed by replicating highly aligned nanogrooves from a compact disc (CD) onto a casted flexible polydimethylsiloxane (PDMS) surface. Leveraging the replicated nanogrooves, copper hexadecafluorophthalocyanine (F16CuPc) and various metal phthalocyanines are guided into large‐area, self‐aligned nanowires. Subsequently, by employing specifically designed shadow masks during electrode deposition, these nanowires are seamlessly integrated as either a monolithic flexible photodetector with a large sensing area or on‐chip flexible photodetector arrays. The resulting flexible photodetectors exhibit millisecond and long‐term stable response to UV–vis–NIR light. Notably, they demonstrate exceptional bending stability, retaining stable and sensitive photoresponse even at a curvature radius as low as 0.5 cm and after enduring 1000 bending cycles. Furthermore, the photodetector array showcases consistent sensitivity and response speed across the entire array. This work not only proves the viability of guided nanowire growth on flexible polymer surfaces by replicating CD nanogrooves but also underscores the potential for large‐scale monolithic integration of guided nanowires as flexible devices.

Keywords

• array
• flexible photodetectors
• monolithic integration
• nanowires
• organic semiconductors