Characterization of the elastic modulus of ceramic–metal composites with physical and mechanical properties by ultrasonic technique

Abstract

The scope of this study, that is, the effect of the elastic modulus obtained by ultrasonic method on the physical and mechanical properties of tungsten carbide (WC)-based ceramic–metal composites, which have Ni and Co metallic binder composition produced by powder metallurgy and represented by high strength and hardness criteria, was investigated. In order to obtain composite samples in the study, it was sintered in a microwave furnace at different temperatures to combine the powder particles prepared at the rate of 60% Ni, 20% Co, and 20% WC by weight. Then, the velocities and longitudinal attenuation values of longitudinal and shear ultrasonic waves along the composite sample were measured using the ultrasonic pulse-echo method. The elastic modulus of the composites was determined using ultrasonic velocities and sample density. Hardness testing, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyses were also performed. The results show that the elastic modulus increases with the increase in sintering temperature and ultrasonic wave speeds, but decreases with the longitudinal attenuation value, considering the SEM images and XRD analysis. There is also a linear relationship between elastic modulus and stiffness.

Keywords

• ultrasonic
• composite
• elastic modulus
• sintering temperature
• hardness