An automated low-cost monitoring station for suspended sediments and water level

Abstract

The use of low-cost sensors, with open-source code, facilitates greater spatial resolution and flexibility of environmental monitoring, thus generating more information and overcoming limitations of traditional commercial sensors. Measurement of water turbidity using submerged sensors can be problematic in that rapid biofouling requires frequent site visits to remove, clean, calibrate and replace the sensor. We therefore designed an automated system using low-cost commercially-available sensors that pumps water from the stream, samples it for turbidity and purges remaining water, leaving the turbidity sensor dry between measurements, thus greatly reducing the biofouling problem and minimizing operation costs. Our station was able to estimate suspended sediment concentrations between 0 and 6 g/L with a root mean square error (RMSE) around 5 % of the total range, which meets typical research and operational study requirements. The results showed that the monitoring station is capable of monitoring water level and turbidity for long periods without the need of cleaning the turbidity sensor, due to its purge function. We demonstrated that spatially intense measurement of turbidity within catchments and drainage networks can be achieved at a relatively low cost, which allows a better understanding of the main sources of suspended sediments and their spatial and temporal variability.

Keywords

• Suspended solids concentration (SSC)
• Flow cell
• Stream
• Water level
• Autosampler
• Turbidity