The investigation of the stress distribution in abutment teeth for connected crowns

Abstract

Background/purpose: With the advancement of an over aging society, the average number of remaining teeth has increased. However, these remaining teeth do not always have sufficient alveolar bone support, and sometimes fabricated connected crowns are applied. This study evaluated the influence of crown material, crown thickness, and alveolar bone resorption on the stress distribution within the abutment teeth of connected crowns. Materials and methods: Using structural analysis software, a premolar crown model was fabricated. Three kinds of crown materials, two types of crown thickness, two types of post and core systems, and two levels of alveolar bone were assumed and evaluated for the stress distribution within the abutment teeth. Results: The higher material properties crown was, the more stress was concentrated at the marginal area. The composite resin core showed larger stress values around the marginal area, and the metal core showed larger stress values at the tip of the post. Alveolar bone resorption progressed, the marginal area stress value increased. Conclusion: The low elastic modulus crown material polyetheretherketone (PEEK) prevented stress concentrations at the marginal area of the crown and dentine, even with alveolar bone resorption. However, the amount of bone resorption has a great influence on the stress distribution around the tip of the post compared to the type of crown material.

Keywords

• Alveolar bone resorption
• Connected crowns
• Finite element analysis
• Polyetheretherketone
• Stress concentration