A new cohesive-based modelling of moisture-dependent mode II delamination of carbon/epoxy composites

Abstract

The cohesive zone model (CZM) is widely employed for simulating delamination and debonding behaviour in engineering structures. However, the choice of CZM shape impacts the accuracy of simulation results. Therefore, the selection of a suitable Traction-Separation Law (TSL) with appropriate cohesive parameters is crucial. This study focuses on simulating the mode II delamination of unidirectional carbon/epoxy composites under varying moisture content levels (0%, 2.2%, 3.8%, and 5.3%) using the End Notched Flexure (ENF) test. Trapezoidal TSL (TTSL) with varying pseudo-plasticity parameter (Γ) was implemented and compared. A guideline was proposed in this study to aid in the selection of cohesive parameters, and a relationship between these parameters and moisture content was established. The results indicate that Γ = 0.99 yields a more accurate force-displacement response compared to Γ = 0. The estimated cohesive zone length falls within the range of 2.0–2.4 mm. During crack growth, the analysis reveals that, at the peak force, a region approximately 0.5–0.6 mm ahead of the crack tip undergoes total failure. Simultaneously, damage initiation occurs in the region 2.3–2.4 mm beyond the complete failure zone.

Keywords

• Carbon/Epoxy composite
• Moisture absorption
• Mode II delamination
• Cohesive zone model
• Residual property model