Case Study: Validation of the Spectral-Analysis-of-Surface-Waves Method for Concrete Pavement Condition Evaluation

Abstract

Before conducting pavement rehabilitation, the concrete pavement performance evaluation is more than necessary to assess the strength and analyze the internal condition. To evaluate the modulus performance of concrete pavement and provide theoretical support for subsequent maintenance and rehabilitation, the SASW (Spectral-Analysis-of-Surface-Waves) method, a non-destructive testing method based on surface waves, was used to determine the modulus of three in-service concrete pavements. At the same time, FWD (Falling Weight Deflectometer) testing and on-site coring were carried out at the measuring points. Through the analysis of modulus results measured in the field, it was found that the SASW method can accurately obtain the elastic modulus of the concrete layer and base layer. Compared with the concrete modulus measured by FWD, the modulus measured by the SASW method was closer to the uniaxial compressive modulus. Moreover, since the SASW method has the ability to provide gradient modulus varying with depth and determine the pavement thicknesses, it is reasonable to recognize the location of the inherent distress based on the region where the modulus suddenly decreases within one layer. The comprehensive evaluation of concrete pavement condition, including the modulus value and internal distress recognition, has the capability to assist in determining the design of overlay asphalt thickness and material.

Keywords

• pavement engineering
• pavement modulus
• SASW method
• concrete pavement
• non-destructive testing