Resistance of wood coated with oriental lacquer (urushi) against damage caused by subterranean termite

Abstract

Abstract The sap of urushi tree (Toxicodendron vernicifluum (Stokes) F.A. Barkley) has been used for coating materials and is known as urushi or oriental lacquer in East Asia. The potential of termite attacks against wood samples coated with four types of urushi: Ki-urushi, Sugurome-urushi, Kuro-Sugurome-urushi, and Bengara-urushi, in correlation with their chemical and mechanical properties was investigated in this study. Mortalities of the subterranean Formosan termite (Coptotermes formosanus Shiraki) after a 3-week no-choice feeding tests in samples coated with all types of urushi showed no significant difference from those of control samples. However, mass loss of the sample coated with urushi was lower than that of the control sample especially for Sugurome-urushi (Tukey’s test: p < 0.05). Results of Fourier transform infrared spectra analysis suggested that the degree of crosslinking reaction of Sugurome-urushi was higher than that of other urushi. The highest indentation stiffness was detected in the sample surface coated with Sugurome-urushi and Sugurome-urushi film, which have better ductile properties when compared with others. Moreover, the tangential section of Sugurome-urushi was smoother than that of the others. Increasing the hardness and smoothness of wood samples by coating with urushi could be effective in preventing termite penetration.

Keywords

• Oriental lacquer
• Subterranean termite
• Mortality rate
• Wood consumption rate
• Surface roughness
• Surface stiffness