Effect of Hydraulic Loading Rate on Treatment Performance of a Pilot Wetland Roof Treating Greywater from a Household

Abstract

To solve the upcoming environmental problems, sponge city concepts as well as new technologies are being developed these days. One of the future challenges is to reduce drinking water demand by using decentralized water recycling systems. This study aimed to investigate the performance of a specially designed pilot wetland roof (PWR) treating domestic greywater (GW) at ground level under outdoor conditions and to evaluate the effects of different hydraulic loading rates (HLRs) for a period of two years. The results showed highly efficient removal of typical greywater pollutants from the system, e.g., five-day biochemical oxygen demand (BOD5) > 96%, chemical oxygen demand (COD) > 93%, total suspended solids (TSS) >94%, anionic surfactants (AS) > 94%, ammonium-nitrogen (NH4-N) > 84%, total nitrogen (TN) > 71%, total phosphorous (TP) > 87%, and E. coli (1.86 ± 1.54 log-removal). The mean concentrations of the targeted parameters at the outflow were in compliance with the requirements for discharge to the environment and met reclaimed water quality standards for agricultural irrigation, except for E. coli. Statistically significant (p –2 d–1 contributed to a higher removal efficiency without compromising the limit values. A comparatively low HLR of 45 L m–2 d–1 should be applicable if pathogen removal is the most important requirement. Plant species showed good plant vitality and adapted well to the water storage mat. The higher the mean ambient air temperature, the greater runoff reduction (>50%) was observed due to high evapotranspiration. The results showed the system is a promising green technology for GW recycling and can be scaled up for application to urban buildings.

Keywords

• green technology
• design
• pollutants removal
• evapotranspiration
• discharge
• greywater reuse