Electromagnetic characterization of mirror symmetric resonator based metamaterial and frequency tuning: a dielectric based multilayer approach

Abstract

Abstract This article presents a novel metamaterial (MTM) with a mirror symmetric resonator that exhibits multiple resonances of transmission coefficient covering the L, S, C, and X bands. The resonating patch is constructed on a low-loss Rogers (RT5880) substrate with a dimension of 20 × 20 × 1.575 mm3. It consists of four equal quartiles with each quartile made with interconnected split-ring resonators; the quartiles are in mirror symmetry with each other. The proposed MTM exhibits resonances at 1.98 GHz, 3.67 GHz, 4.74 GHz, 8.38 GHz, and 10.8 GHz, and electromagnetic characterization is performed through studies of permittivity, permeability, refractive index, and impedances. Power analysis is also performed, and the effect of polarized incident waves is studied. An electromagnetic characterization study reveals that the proposed MTM shows negative permittivity with near-zero permeability and refractive index. It also reveals very little power consumption in the vicinity of the resonances. The dielectric-based frequency tuning is studied by using different dielectric layers over the patch that provides good frequency tuning; this method provides flexibility for adjusting the resonance frequencies in accordance with the application demand. The measured result of the proposed unit cell with the dielectric layer is extracted using a vector network analyzer, and the results exhibit good similarity with the simulated ones. The above-mentioned properties, along with a good effective medium ratio (EMR) of 7.57 indicate that this MTM is suitable for frequency selective applications in microwave devices such as antenna performance improvement and sensing.