Archives of Metallurgy and Materials (Sep 2023)

Influence the Composition of the Core Mixture to the Occurrence of Veinings on Castings of Cores Produced by Cold-Box-Amine Technology

  • P. Delimanová,
  • I. Vasková,
  • M. Bartošová,
  • M. Hrubovčáková

DOI
https://doi.org/10.24425/amm.2023.145458
Journal volume & issue
Vol. vol. 68, no. No 3
pp. 947 – 953

Abstract

Read online

The main problem in the cores production by cold-box method is the occurence of surface defects due to the tension generated by thermal expansion of the silica sand. One of the possibilities of eliminination is exchange of silica sand from another location. Another interesting factor is the type of used binder and its amount. However, even these measures donʹt guarantee sufficient quality. Foundries most often solve this problem by adding expensive additives to the core mixture. Foundries may have a dilemma in choosing the right additive. The aim of this paper was to investigate the effect of silica sand from two different locations, the effect of dosing the amount of binder and the addition of several types of commonly available additives on the quality of casting cavities. For this purpose, a total of 11 differently composed core sand mixtures were prepared, but only one of these mixtures was successful.

Keywords