Processing and Application of Ceramics (Jun 2022)

Oxidation resistance performance of SiC-AlON ceramic composites at high temperature

  • Xiao Lai Rong,
  • Xiao Yu Xiang,
  • Zhao Xiao Jun,
  • Li Xing,
  • Chen Lv Ming,
  • Xuan Tu Xiao,
  • Zhang Ya Fang,
  • Cai Zhen Yang,
  • Wang Xiao Feng

DOI
https://doi.org/10.2298/PAC2202097X
Journal volume & issue
Vol. 16, no. 2
pp. 97 – 105

Abstract

Read online

The microstructure and oxidation behaviour of the pure AlON ceramics and 8 wt.% SiC-AlON composite were investigated at 700-1500°C. With increasing oxidation temperature, the surface morphology of two ceramics showed a change from acicular to flaky-like and then to granular features. With the addition of nanosized SiC particles, the oxidation resistance of the ceramics was remarkably enhanced above 1100°C. This is attributed to the formation of a dense oxide layer composed of Al2O3, SiO2 and mullite, which could cover the whole matrix and suppress further penetration of oxygen. Due to the dense oxide layer, the oxidation kinetics of the 8 wt.% SiC-AlON composites conformed to a parabolic law, while that of the pure AlON conformed to a linear law. After oxidation at 1500 °C for 40 h, the weight gain of the 8 wt.% SiC-AlON composites was 3.07mg/cm2, which was only 22.5% of that of the pure AlON.

Keywords