Corrosion behavior of a Co−Cr−Mo−Si alloy in pure Al and Al−Si melt

Abstract

Metallic phase change materials (MPCMs) are attracting considerable attention for their application in thermal energy storage. Al–Si alloys are considered potential MPCMs; however, to develop storage systems/modules, it is crucial to fabricate corrosion-resistant materials for MPCMs. In this study, the corrosion behavior of Co−28Cr−6Mo−1.5Si (wt%) alloy was examined via immersion tests in commercial Al−Si alloy (ADC12) melt at 700°C for 10 h. The results were compared to those obtained for pure Al. Substrate thickness loss measurements revealed that the liquid metal corrosion was more severe in the Al−Si melt than that in pure Al, suggesting an increased reactivity due to Si addition. Interfacial analysis elucidated a direct reaction between the alloy substrate and molten Al in both cases. Furthermore, the formation of oxides such as Al2O3 and SiO2 did not contribute to corrosion resistance.

Keywords

• phase change material
• aluminum
• corrosion
• co−cr−mo alloys