FCC phase formation in immiscible Mg–Hf (magnesium–hafnium) system by high-pressure torsion
Edgar Ignacio López Gómez,
Kaveh Edalati,
Diego Davi Coimbrão,
Flávio José Antiqueira,
Guilherme Zepon,
Jorge M. Cubero-Sesin,
Walter José Botta
Affiliations
Edgar Ignacio López Gómez
WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka 819-0395, Japan
Kaveh Edalati
WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka 819-0395, Japan
Diego Davi Coimbrão
Department of Materials Engineering, Federal University of São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
Flávio José Antiqueira
Department of Materials Engineering, Federal University of São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
Guilherme Zepon
Department of Materials Engineering, Federal University of São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
Jorge M. Cubero-Sesin
Centro de Investigación y Extensión en Materiales (CIEMTEC), Escuela de Ciencia e Ingeniería de los Materiales, Instituto Tecnológico de Costa Rica (ITCR), Cartago 159-7050, Costa Rica
Walter José Botta
Department of Materials Engineering, Federal University of São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
Magnesium and hafnium, two hydride-forming and biocompatible metals with hexagonal close-packed crystal structures, are thermodynamically immiscible even in the liquid form. In this study, these two elements were mechanically mixed by high-pressure torsion straining, and a new FCC (face-centered cubic) phase was formed although these two elements do not form the FCC phase even under high pressure or at high temperature. Microstructural examination by scanning-transmission electron microscopy combined with an ASTAR automatic crystal orientation and phase mapping technique confirmed that the FCC phase was stabilized mainly in the Hf-rich nanograins with localized supersaturation. Attempts to control the phase transformations under a hydrogen atmosphere to produce ternary magnesium–hafnium hydrides for hydrogen storage applications were unsuccessful; however, the material exhibited enhanced hardness to an acceptable level for some biomedical applications.