Research on Optimal Proportion and Performance of Cement-Clay Slurry

Abstract

For the cement-clay slurry commonly used in dynamic water grouting, consider adding coal ash to optimize the performance of cement-clay slag composite slurry and discuss the reaction mechanism of the slurry through microchemical element analysis; the orthogonal test was used to study the influence of various factors on material setting time, solidification ratio, water segregation rate, and the optimized ratio of the slurry that was obtained by integrating the unconfined compressive strength of grouting concretion body and slurry configuration cost. The results showed that the water-solid ratio had the greatest influence on the comprehensive performance, followed by the amount of coal ash admixture. The best performance of the composite slurry was obtained with a water-solid ratio of 0.8:1 and a cement:coal ash:clay:quicklime:sodium sulfate:water mass ratio of 1:0.45:0.20:0.05:0.07:1.32. Finally, by comparing the mechanical properties of the optimized slurry and the grouting concretion body, it is proved that the optimized slurry has superior performance to meet the general grouting project requirement.