Mixtures of Cationic Linear Polymer and Anionic Polymeric Microspheres for Stabilization of Sand: Physicochemical, Structural and Mechanical Study

Abstract

Aqueous formulations based on anionic butadiene-styrene microspheres (BSMs) and cationic poly(diallyldimethylammonium chloride) (PDADMAC) with the weight PDADMAC fraction from 0 to 1 were studied as the stabilizers of loose sandy soils. In general, these systems were shown to be represented as the mixtures of microspheres saturated with PDADMAC and unbound polycation. Mechanical testing of BSMs–PDADMAC films evidenced that with increasing weight PDADMAC fraction, a 20-fold growth in elastic modulus, 2-fold growth in strength and 2-fold decrease in ultimate strain of the material were observed. Treatment of the sand with the above formulations resulted in formation of a protective porous polymer-sand surface crust with the strength from 0.8 to 45.0 MPa. “Elasticity–rigidity” balance and water resistance of the crusts were controlled by weight fraction of polycation in the mixed formulation. Stable water-resistant polymer-sand crusts were shown to be prepared using formulations with the weight PDADMAC fraction from 0 to 0.2. The results indicated a great potential of the polymer-colloid formulations for the fabrication of structured sand coatings with controlled properties.

Keywords

• anionic polymer microspheres
• linear polycation
• saturated complex
• sand
• polymer-sand coatings
• elasticity