Materials (Mar 2022)
Characterization of Titanium Alloy Obtained by Powder Metallurgy
Abstract
Ti-based alloys are an important class of materials suitable especially for medical applications, but they are also used in the industrial sector. Due to their low tribological properties it is necessary to find optimal technologies and alloying elements in order to develop new alloys with improved properties. In this paper, a study on the influence of sintering treatments on the final properties of a titanium alloy is presented. The alloy of interest was obtained using the powders in following weight ratio: 80% wt Ti, 8% wt Mn, 3% wt Sn, 6% wt Aluminix123, 2% wt Zr and 1% wt graphite. Two sintering methods were used, namely two-step sintering (TSS) and multiple-step sintering (MSS), as alternatives to conventional sintering which uses a single sintering dwell time. Evolution of sample morphology, composition and crystalline structure with sintering method was evidenced. The lower values for the friction coefficient and for the wear rate was attained in the case of the sample obtained by TSS.
Keywords