Removal of Petroleum Hydrocarbons from Brackish Water by Natural and Modified Sorbents

Abstract

Crude oil and petroleum products made from it are increasingly being extracted and consumed worldwide as an important energy source. During necessary transportation, e.g., by tanker, an oil spill might occur, which leads to water pollution by oil. One of the methods of cleaning up oil spills is to use sorbents, preferably made from natural materials. This study evaluates the remediation efficiency of brackish water polluted with crude oil, marine diesel oil (MDO) and lubricating oil. The experiment was performed with three different sorbents (straw, straw modified with methoxytrimethylsilanes (MTMS) and wood chip shavings) and without them. The evaporation loss and the dissolved and sorbed fractions of oil were measured by gas chromatography (GC) to evaluate remediation efficiency. Hydrophobization made the natural sorbents buoyant for the duration of the experiment, with only a slight increase in the maximum sorption capacity. The sorbents increased the evaporation of the oils and also of the water, reduced the proportion of the oil dissolved in water and retained the sorbed proportion for the lubricating oil and partly for the MDO, to such an extent that it could not be extracted entirely even after a 60-min extraction time.

Keywords

• oil pollution
• oil spill clean-up
• sorbent
• sorbent modification
• sorption capacity
• MTMS treatment