Study on the effect of grain size on the microstructure evolution of Q345 steel plate under high-speed impact

Abstract

This study used a two-stage light gas gun to launch reactive fragments at high speeds into steel plates with different grain sizes (large and small). In addition, utilizing material characterization technologies like SEM, EBSD, and TEM, the microstructure evolution of steel plates with varying grain sizes was measured and analyzed both before and after impact. The results indicate that small-grain steel plates are more prone to intergranular or transgranular crack propagation, and they produce more macroscopic and microscopic cracks on the perforated surface under high-speed impact than large-grain steel plates. At the grain boundaries of both large and small grains of steel plate, as well as high-density dislocations, the impact process produces a significant number of minor angles with local misorientation ranging from 2 to 10°. A small-grain steel plate has an obvious grain boundary-strengthening effect. Small grains are more likely than large grains to cause changes in the crystal structure of BCC-HCP close to the perforation, and some grains form a lot of nanoscale elongated structures with the same crystal structure as the matrix. The interaction between dislocations or the emission of a large number of dislocation cells from grain boundaries may occur within some of the larger grains. The study's findings, which are illustrated in this article, can be used as a reference to understand how grain size influences the steel plates' microstructure changes after impacts.

Keywords

• Grain size
• High speed impact
• Microstructure evolution
• Dislocation
• Crack