Structure and magnetic properties of the spinel-polymer composites

A.V. Trukhanov; E.L. Trukhanova; T.I. Zubar; Yuan Yao; S.V. Podgornaya; M.A. Almessiere; A. Baykal; Y. Slimani; A.A. Rotkovich; M.I. Sayyed; M.V. Silibin; S.V. Trukhanov; D.I. Tishkevich

Journal of Materials Research and Technology (May 2024)

Structure and magnetic properties of the spinel-polymer composites

A.V. Trukhanov,
E.L. Trukhanova,
T.I. Zubar,
Yuan Yao,
S.V. Podgornaya,
M.A. Almessiere,
A. Baykal,
Y. Slimani,
A.A. Rotkovich,
M.I. Sayyed,
M.V. Silibin,
S.V. Trukhanov,
D.I. Tishkevich

Affiliations

A.V. Trukhanov: National University of Science and Technology MISiS, 119049, Moscow, Russia; Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus; Corresponding author. National University of Science and Technology MISiS, 119049, Moscow, Russia.
E.L. Trukhanova: National University of Science and Technology MISiS, 119049, Moscow, Russia; Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus
T.I. Zubar: Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus
Yuan Yao: MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
S.V. Podgornaya: National University of Science and Technology MISiS, 119049, Moscow, Russia
M.A. Almessiere: Department of Biophysics, Institute for Research and Medical Consultations (IRMC), Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, 31441, Saudi Arabia; Department of Physics, College of Science, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, 31441, Saudi Arabia
A. Baykal: Food Engineering Department, Faculty of Engineering, Istanbul Aydin University, 34295, Istanbul, Turkey
Y. Slimani: Department of Biophysics, Institute for Research and Medical Consultations (IRMC), Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, 31441, Saudi Arabia
A.A. Rotkovich: Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus
M.I. Sayyed: Renewable Energy and Environmental Technology Center, University of Tabuk, Tabuk, 47913, Saudi Arabia; Department of Physics, Faculty of Science, Isra University, 1162, Amman, Jordan
M.V. Silibin: I.M. Sechenov First Moscow State Medical University, Moscow, 119435, Russia
S.V. Trukhanov: National University of Science and Technology MISiS, 119049, Moscow, Russia; Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus
D.I. Tishkevich: National University of Science and Technology MISiS, 119049, Moscow, Russia; Scientific-Practical Materials Research Centre of NAS of Belarus, 220072, Minsk, Belarus

Journal volume & issue: Vol. 30
pp. 7115 – 7124

Abstract

Read online

The development of the functional magnetic composites with determined properties is important task for modern material sciences. Control of magnetic and electrodynamic properties realized by the ceramic/polymer composites preparation. Conduction of the investigations of the correlation between chemical composition of the fillers (magnetic powders) and their concentration in the polymer matrix is the best way for solving this task. Two- and tree-component spinel-polymer composites were produced by thermal pressing. As spinels, CoFe2O4 (CF) and Ni0.4Cu0.2Zn0.4Fe2O4 (NCZFO) were used. As a polymer, FEP was used. The concentration of the spinels in the polymer matrix was fixed at 20 mass.%. Investigation of the structural features and magnetic properties were carried out. The impact of the chemical composition and phase ratio of the composites on crystal structure, microstructure, and magnetic properties were established. Magnetic measurements were performed at 300 and 10 K in the fields up to 70 kOe. It was demonstrated that the synergetic effect of ceramic composites violates of the principle of additivity in two-phase ceramic composites. The impact of the polymer matrix on magnetic properties was demonstrated. It opens new perspectives for practical applications of such kind of materials.

Published in Journal of Materials Research and Technology

ISSN: 2238-7854 (Print); 2214-0697 (Online)
Publisher: Elsevier
Country of publisher: Netherlands
LCC subjects: Technology: Mining engineering. Metallurgy
Website: https://www.journals.elsevier.com/journal-of-materials-research-and-technology/

About the journal

Abstract

Keywords