Acoustic Pressure Amplification through In-Duct Sonic Black Holes

Abstract

Acoustic detection of machinery defaults from in-duct measurements is of practical importance in many areas, such as the health assessment of turbines in ventilation systems or engine testing in the surface and air transport sectors. This approach is, however, impeded by the low signal-to-noise ratio (SNR) observed in such environments. In this study, it is proposed to exploit the slow sound effect of Sonic Black Hole (SBH) ducted silencers to enhance the sensing of incident pulse acoustic signals with low SNR. It is found from transfer matrix and finite element modelling that fully opened SBH silencers with perforated skin interfaces are able to substantially enhance an incident pulse amplitude while channeling an air flow. We demonstrate that the graded depths of the SBH cavities provide rainbow spectral decomposition and amplification of the incident pulse frequency components, provided that impedance matching, slow sound, and critically coupled conditions are met. In-duct experiments showed the ability of a 3D printed SBH silencer to simultaneously enhance acoustic sensing and fully trap the pulse spectral components in the SBH cavities in the presence of a low-speed flow. This study opens up new avenues for the development of dual-purpose silencers designed for acoustic monitoring and noise control in duct systems without obstructing the air flow.

Keywords

• acoustic sensing
• sonic black holes
• noise control in ducts
• acoustic metamaterials