A Numerical Case Study of Particle Flow and Solar Radiation Transfer in a Compound Parabolic Concentrator (CPC) Photocatalytic Reactor for Hydrogen Production

Abstract

Compound parabolic concentrator (CPC) photocatalytic reactors are commonly used for photocatalytic water splitting in hydrogen production. This study aimed to gain a better understanding of the physical processes in CPC photocatalytic reactors and provide theoretical support for their design, optimization, and operation. The analysis involved the ray tracing approach, Euler–Euler two-fluid model, and discrete ordinates method (DOM) to study solar radiation transfer and particle flow in the reactor. The distribution of solar radiation on the receiving tube’s surface after CPC concentration was obtained by conducting the ray tracing approach. This solar radiation distribution was then coupled into the Euler–Euler two-fluid model to solve for the natural convection flow field, the temperature field, and particle phase volume fraction distribution inside the receiving tube over a period of 120 s. Lastly, the discrete ordinates method (DOM) was used to analyze the transfer of radiation inside the receiving tube at different times, obtaining the distribution of local volume radiative power absorption (LVRPA) and the total radiative power absorption (TRPA) inside the tube. The results showed that the TRPA reached its maximum at 120 s, accounting for 66.61% of the incident solar UV radiation. According to the above results, it could be suggested that adopting an intermittent operation mode in CPC photocatalytic reactors is reasonable and efficient.

Keywords

• compound parabolic concentrator (CPC) photocatalytic reactor
• natural convection
• ray tracing method
• Euler–Euler two-fluid flow model
• radiative transfer equation