The Effect of the Isolator Design on the Efficiency of Rotary Piston Compressors

Abstract

The current work investigates the relationship between the shape of an isolator of a concentric rotary piston compressor and the secondary peak pressure developed during each operating cycle. This peak pressure is developed when the piston passes through the isolator cavity, and it is negative for compressor efficiency. The aim of this paper is to identify the isolator cavity shape that minimizes this secondary peak to improve compressor efficiency. This study covers five different cavities that may be used in such compressors. Contrary to our expectations, the conclusion is that the best geometry is the one that can be manufactured with CNC machining. The geometry that can be manufactured with 3D printing also produces a significantly lower secondary peak pressure, but it is not cost-efficient. Another limitation of the 3D printing design is the thin walls that this cavity creates. Very thin walls may cause significant deformation during the compression cycle. The conclusion is that there is a CNC machining design that is cost-efficient and allows for higher compressor performance.

Keywords

• rotary
• isolator
• sliding port
• cavity
• efficiency
• compressor