Directly electrospinning submillimeter continuous fibers on tubes to fabricate H2S detectors with fast and high response

Abstract

The fast and high response detection of neurotoxic H2S is of great importance for the environment. In this paper, directly electrospinning technology on the ceramic tube is developed to improve the response of H2S detector based on superlong SnO2 fibers. The submillimeter continuous fibers are deposited directly on ceramic tubes by in-situ electrospinning method and can keep morphology of fibers during calcination. By employing this technology, CuO-doped SnO2 fiber H2S detectors are fabricated, and 10% atom CuO-doped SnO2 H2S detector shows the highest response of 40 toward 1 ​ppm ​H2S at 150 ​°C while the response is only 3.6 for the H2S detector prepared in traditional route. In addition, the in-situ electrospinning H2S detectors show faster response and recovery compared to the H2S detectors fabricated by the conventional way. The high and fast response of H2S detectors based on in-situ electrospinning can be ascribed to the continuous fiber structure and CuO modification. The present in-situ electrospinning technology may provide a new strategy for the development of other gas-detectors and bio-detectors with fast and high response.

Keywords

• Submillimeter continuous fibers
• H2S detectors
• In-situ fabrication