Dynamic Damage Quantification of Slab Tracks—Finite Element Models on Winkler Soil and Finite-Element Boundary-Element Models on Continuous Soil

Abstract

Train passages over intact or damaged slab tracks on different soils were calculated by two methods. The finite element method (FEM) uses a Winkler soil under the track model by adding a thin “soil layer”. The combined finite-element boundary-element method has a continuous soil model that is included by the boundary element method. The basic results are the distributions of the track (rail, track plate, and base layer) displacements along the track for a single axle load. These solutions were superposed to a complete train load and transformed to time histories. The influence of track and soil parameters was analysed. The main interest was the influence of the track damage. A gap between the track plate and base layer of different lengths was studied for changes in amplitudes and widths of deflection. A best fit to measured track displacements was found so that the track damage could be identified and quantified. The FEM model with the Winkler soil cannot be fitted to the amplitude and width with the same soil parameters. Therefore, the FEBEM model is preferable for these railway track problems.

Keywords

• track damage quantification
• finite element method
• combined finite-element boundary-element method