Seawater Corrosion Resistance of Duplex Stainless Steel and the Axial Compressive Stiffness of Its Reinforced Concrete Columns

Abstract

In order to explore the corrosion resistance of duplex stainless steel under seawater corrosion and the compressive stiffness of its reinforced concrete columns, this study first performed seawater corrosion resistance tests on HRB400 ordinary steel rebar and S32205 duplex stainless steel rebar. The effect of the corrosion product film on the corrosion behavior was investigated through polarization curve tests and electrochemical impedance spectroscopy tests. The results showed that the corrosion rate of S32205 duplex stainless steel in a seawater environment was approximately 1/15 that of the HRB400 ordinary steel rebar. The anodic polarization curve of duplex stainless steel rebars exhibited a greater slope than that of carbon steel rebars. In the simulated seawater environment, the corrosion rate of these two kinds of steel bars showed different trends. The corrosion rate of ordinary steel bar HRB400 first decreased and then increased, while that of duplex stainless steel S2205 increased steadily. Furthermore, 18 short concrete columns reinforced with ordinary and duplex stainless steel rebars were subjected to the axial compression test and stiffness analysis; the stiffness of the short columns was calculated from the test data. The theoretical values agreed with the test values, with a stiffness calculation error of less than 5%.

Keywords

• duplex stainless steel
• seawater simulation
• polarization curve
• stiffness analysis