Influence of parameters of impulse laser impact on the formation of the gradient of the structure of porous titanium powder

Abstract

The possibility of selective laser sintering of graded porous and compactly porous structures by surface fusion of powder particles is demonstrated while maintaining a solid core, which leads to the formation of interparticle contacts in the presence of a liquid phase. The interaction of the light flux of the laser pulse with the surface of the powder particles under multiple reflection is considered. It is shown that the effect of single pulses of laser radiation leads to the formation of sintered structural elements of a powder material having a diameter approximately equal to the diameter of the focal spot. Technological regimes of pulsed laser action are established at which steady contact formation of titanium powder particles of the fractional compositions under study occurs. The possibility of obtaining powder materials with a gradient structure by controlling the parameters of pulsed laser action is experimentally demonstrated. It was found that accurate dosing of thermal energy and the number of pulses of laser radiation makes it possible to minimize shrinkage of powder layers in the absence of particle conglomeration, to control the structural characteristics and properties of products, to preserve the microstructure and phase composition of the initial materials.

Keywords

• powder
• titanium
• impulse
• laser
• scanning
• track
• gradient
• microstructure
• phase composition