Geometric Parameter Effects on Bandgap Characteristics of Periodic Pile Barriers in Passive Vibration Isolation

Abstract

To investigate the impact of the geometric parameters of periodic pile barriers on bandgap characteristics in passive vibration isolation, a two-dimensional, three-component unit cell was developed using the finite element method (FEM). This study analyzed the bandgap properties of periodic pile barriers and validated the effectiveness of the FEM through model testing. The FEM was then methodically applied to evaluate the effects of pipe pile thickness, periodic constant, arrangement pattern, and cross-sectional shape on the bandgap characteristics, culminating in the proposition of a novel H-shaped cross-section for the piles. The results demonstrated that the FEM-calculated bandgap frequency range, featuring steel piles arranged in a square pattern, closely aligned with the attenuation zone in the model tests. The lower band frequency (LBF) was primarily influenced by the pipe pile’s inner radius, while the upper band frequency (UBF) was predominantly affected by its outer radius. As the periodic constant increased, the LBF, UBF, and the width of band gap (WBG) all decreased. Conversely, changing the arrangement pattern from square to hexagonal led to increases in UBF and WBG, while the LBF diminished. Notably, the WBG of the H-section steel piles, possessing the same cross-sectional area, was 1.31 times greater than that of the steel pipe piles, indicating an enhanced vibration isolation performance. Additionally, the impact of transverse and vertical characteristic dimensions of the H-shaped pile on the band gap distribution was assessed, revealing that the transverse characteristic dimensions exerted a more significant influence than the vertical dimensions.

Keywords

• periodic pile barriers
• FEM
• model test
• band gap characteristics
• H-shaped steel piles