Numerical Investigation and Experimental Validation of Motion and Distribution of Nonmetallic Inclusions in Argon Protection Electroslag Remelting Process

Abstract

A transient coupled mathematical model has been proposed to predict the motion and distribution of nonmetallic inclusions in the electroslag remelting process. The electromagnetic field, temperature distribution, flow pattern, solidification, and inclusion behavior were solved simultaneously. The Euler-Lagrange approach was used to describe the interaction between continuous phase and inclusions. The discrete phase model (DPM) was adopted to track the particles acted by a number of forces. An experiment under argon protection was implemented, and it agrees well with the simulation. The effect of inclusion diameter was also discussed. The experiment result shows that the typical inclusions in final ingot are Al2O3 core surrounded by an outer sulfide layer and pure MnS inclusions. The total area of inclusions increases from center toward ingot surface, while the average equivalent diameter decreases. The simulated result indicates a denser distribution of inclusions locations at the region ranging from 0.7 to 0.9 radii. Few inclusions are entrapped near the mold due to the strong descending flow. Moreover, the inclusion amount increases with height. The total amounts of inclusions with diameter of 2 μm, 5 μm, and 10 μm in ingot are 2199, 1871, and 1704, respectively. The imposed buoyancy and floatation contribute to this phenomenon.

Keywords

• electroslag remelting
• inclusion
• heat transfer
• fluid flow
• electromagnetism